河北宏旭 浇筑式防撞墙模具 高速公路防撞墙模具 河流**护坡模具

河北宏旭  浇筑式防撞墙模具  高速公路防撞墙模具  河流**护坡模具

Commonly used pouring anti-collision wall mold highway anti-collision wall mold model, the general height is set to 81 cm, pouring type anti-collision wall mold highway anti-collision wall mold is cast-in-place production, two pieces of assembly together to form a complete set of templates, as well as connecting rods, screws and other accessories. The anti-collision wall is generally made of steel mold. Although there is plastic mleyu����.txtold for the anti-collision wall, there is a gap between the use time and the production effect of the anti-collision wall steel formwork. The selection of the model of highway anti-collision wall mold is directly related to the production rate and quality of mold, so the selection of mold material is particularly important. According to the production of the conventional anti-collision wall, the thickness of the panel is 3mm and the thickness of the rib plate is 5mm. If the length of each anti-collision wall reaches 2m, 4mm panel can be selected.The anti-collision mold is usually placed on the inner wall of the highway and the guide mold is placed on the outer wall of the highway. The ejection system of steel mould for anti-collision pier generally includes: thimble, front and rear thimble plate, thimble guide rod, thimble return spring, thimble plate locking screw and so on. When the product is molded and cooled in the mold of pouring type anti-collision wall, the front and rear mold of the mold are separated and opened.